Search results

On Cisco IOS XR platforms using the EVC infrastructure, which command is used to enable a Layer 2 VPN subinterface? A. interface gi0/0/0/0.10 l2transport B. interface gi0/0/0/0.10 switchport mode tunnel dot1q-tunnel C. interface gi0/0/0/0.10 switchport mode trunk D. interface...

When implementing VPLS on Cisco IOS XR routers, the VPLS PW neighbors can be statically defined under which configuration mode? A. bridge group B. l2transport C. bridge-domain D. vfi E. mpls ldp

Developing Personal Accountability https://www.youtube.com/watch?v=MFBrCM_WYXw What is personal accountability? Being willing to answer - to be accountable - for the outcomes resulting from your choices, behaviors, and actions. - Todd Herman - How Personal Accountability Helps...

What is required on a Cisco IOS XR router to assign an interface to a VRF? A. Remove the IP address configuration on the interface, assign the VRF to the interface, and then reconfigure the IP address on the interface. B. Shut the interface, assign the VRF to the interface, and then no shut...

In which Cisco IOS XR configuration mode is the redistribute static command applied to enable the redistribution of static VRF routes between the PE routers? A. RP/0/RP0/CPU0:PE(config-bgp-vrf-af)# B. RP/0/RP0/CPU0:PE(config-bgp-vrf)# C. RP/0/RP0/CPU0:PE(config-bgp)# D...

40X . EB#402 - 11 ส.ค. 55: www.youtube.com/watch?v=fwP-zloZ95A.EB#404 - 18 ส.ค. 55: www.youtube.com/watch?v=hz7DCisuGyo ...EB#408 - 1 ก.ย. 55: www.youtube.com/watch?v=Btvc_RfxdSY ....EB#413 - 16 ก.ย. 55: www.youtube.com/watch?v=-QgVm7l9S-4 EB#414 - 22 ก.ย. 55...

Refer to the partial Cisco IOS XR PE router configuration exhibit for supporting a Layer 3 MPLS VPN customer using EIGRP AS 20 as the CE-to-PE routing protocol. router eigrp 10 vrf Customer_A address-family ipv4 default-metric 10000 100 255 1 1500 autonomous-system 20 redistribute bgp...

With Layer 3 MPLS VPN implementations on Cisco IOS XR PE routers, an interface is assigned to a VRF using the vrf command in which configuration mode? A. RP/0/RP0/CPU0:PE(config-bgp-af)# B. RP/0/RP0/CPU0:PE(config-vrf)# C. RP/0/RP0/CPU0:PE(config-if)# D. RP/0/RP0/CPU0:PE(config-bgp)#

In MPLS Layer 3 VPN implementations, what is used at the PEs to transform the customer IPv4 prefixes into a unique 96-bit prefix? A. RT B. PW ID C. AS number D. RD E. VC ID

When implementing MPLS Layer 3 VPN services, which CE-PE routing method does not require the use of the redistribute command to enable the customer routes to be advertised through the MPLS cloud between the customer sites? A. BGP B. IS-IS C. OSPF D. static routing E. EIGRP F. OSPF or IS-IS

Which option is the correct command to define an interface as Layer 2 on the Cisco ASR 9000? A. RP/0/RSP0/CPU0:R1(config)#int gigabitEthernet 0/6/0/0 switchport B. RP/0/RSP0/CPU0:R1(config)#int gigabitEthernet 0/6/0/0 l2transport C. RP/0/RSP0/CPU0:R1(config)#int gigabitEthernet 0/6/0/0...

When configuring VPLS on the Cisco ASR 9000, which three configurations are required under the l2vpn configuration mode? A. bridge-group B. xconnect C. vfi D. encapsulation E. bridge-domain

Listening Sample 1 Tape-scripts: SECTION 4 LECTURER : Welcome to further education Information Week. This is the Physical Education Faculty's session and I'm the Head of the Faculty. During the course of this morning we hope to give you a clear idea of what we offer in our training...

When implementing a Layer 2 transport subinterface on a Cisco IOS XR router, default encapsulation option is used to match any packets that are not matched by any other service instances. encapsulation dot1q: Defines the matching criteria to map 802.1Q frames ingress on an interface to the...

When implementing a Layer 2 transport subinterface on a Cisco IOS XR router, which encapsulation option is used to match any packets that are not matched by any other service instances? A. tag B. untagged C. default D. any

What is an advantage of using the Cisco EVC infrastructure to implement carrier-class Ethernet services that are not available on non-EVC-capable platforms? A. interworking support B. local cross-connect support C. PW stitching support D. PW redundancy E. flexible frame-matching support and...

LATTE Listen Apologize Take action Thank you Explanation (option) http://th.wikipedia.org/wiki/BYOD Management Skills Necessary at Various Levels of an Organization. Balance your skills To raise yourself to a better person You have to... make something specialmake some extra effort...

When implementing VPLS on Cisco IOS XR routers, the customer-facing subinterfaces on the PE routers are assigned to which Cisco EVC component? A. bridge group B. bridge domain C. BVI D. Layer 2 transport E. VFI

Implementing H-VPLS instead of VPLS reduces which requirement? A. having to implement QinQ tagging between the UPE and the NPE B. having a full mesh of PWs between all the UPE routers C. having a full mesh of PWs between all the PE routers in the service provider MPLS core D. having to...

When implementing H-VPLS with QinQ access on Cisco Metro Ethernet switches, which two commands enable the QinQ tagging? A. switchport mode trunk B. switchport access vlan {sp-vlan} C. switchport access vlan {customer-vlan} D. encapsulation dot1q {customer-vlan} second-tag {sp-vlan} E...