PlAwAnSaI
Administrator
When upgrading a Cisco ASR 1001 Router, when is the request platform software package expand file bootflash:image-name command required?
A. to perform Cisco IOS ISSU on the standby route processor
B. to run the router using individual subpackages
C. to copy the consolidated Cisco IOS XE image to the bootflash:
D. to run the router using a consolidated package
ASR 1001-X Show Transceiver:
To show transceiver hardware details:
#show hw-module interface g0/0/x transceiver idprom
To show transceiver temp and light levels:
#show hw-module interface g0/0/x transceiver status
Cr: Daniel
A. to perform Cisco IOS ISSU on the standby route processor
B. to run the router using individual subpackages
C. to copy the consolidated Cisco IOS XE image to the bootflash:
D. to run the router using a consolidated package
ASR 1001-X Show Transceiver:
To show transceiver hardware details:
#show hw-module interface g0/0/x transceiver idprom
To show transceiver temp and light levels:
#show hw-module interface g0/0/x transceiver status
Cr: Daniel